Welkom terug
Log in op je Altimeter Cloud account
Nog geen account? Maak er een aan
Maak een gratis account aan
We sturen een bevestigingslink naar je e-mail. Controleer je spammap als je deze niet ontvangt.
Heb je al een account? Inloggen
Home
Apparaat: N-P85-E090
Vlucht ID: 642Toon gebeurtenissen
Downloaden
Temp. & druk aanpassen ?
Afbeelding
Datasets
Klik op de legenda om datasets te tonen of verbergen
Zoom
Klik en sleep, of knijp op mobiel
Vlucht vergelijken ?
Vluchtsamenvatting
Hoogte
Apogeum
71.03 Meter
Tijd tot apogeum
4.25 seconds
Hoogte uitbranding
40.39 m
Hoogte max. snelheid
12.79 m
Hoogte uitwerping
0.15 m
Hoogte landing
62.7 m
Stabiliteit
Stabiliteitsscore
33.2 / 100 (Redelijk)
Stabiliteitsoverzicht
Helling bij burnout (20%)19.6
Hellingconsistentie (15%)63.5
Stamp/gier snelheid (30%)11.6
Demping (20%)15.3
Stuwkrachtrechtheid (15%)88.1
Snelheid
Max. stijging
37.14 m/s
Max. daling
-6.51 m/s
Bij uitbranding
15.150 m/s
Snelheid landing
-0.255 m/s
Snelheid daling
-0.348 m/s
Snelheid uitwerping
7.59 m/s
Recovery
Single deploy (no dual deploy detected)
Versnelling
Max. stijging
7.37 G
Max. daling
10.2 G
Max. tijdens verbranding
7.37 G
Gem. stijging
0.2 G
Gem. verbranding
2.41 G
Tijden
Uitbranding (eerste)
1.37 seconds
Apogeum
4.25 seconds
Mogelijke uitwerping
0 seconds
Landing
5.28 seconds
Uitgang #1 AAN
0 seconds
Uitgang #1 UIT
0 seconds
Hoeken
Helling lanceerplatform
2.47°
Max. helling tot uitbranding
16.68°
Rol bij lancering
-2.36°
Stamp bij lancering
-0.65°
Max. rotatie (verbr.)
1308.01 dps
Gem. rotatie (verbr.)
609.14 dps
Algemeen
Uploaddatum
02-Nov at 18:08
Datapunten
1066
Totale opnametijd
33.400 s
Gem. monsters/s
31.9
Aantal vergrendelingen
1
Opnamehoogte
105.04 m
Lancering na inschakelen
11m 38s
Referentie-as
X
Batterij & temperatuur
Batterij start
0%
Batterij einde
0%
Temperatuur start
15.43°C
Temperatuur einde
15.61°C
Temp. MT1 lancering
0°C
Uitvoerregels
Geen regels geconfigureerd
Vluchtdata-animatie
FLIGHT 642
71.03 Meters
ALTITUDE
0.00m
VELOCITY
0.00m/s
ACCEL
0.00G
TILT
0.00°
PITCH
0.00°
ROLL
0.00°
YAW
0.00°
TIME
0.00s
AWAITING LAUNCH
ALT
altimetercloud.com
LAUNCH
T+0.00s
LANDING
BURNOUT
Motor burn complete
Opmerking: De vluchtanimatie vereist dat uw hoogtemeter in een vaste oriëntatie is gemonteerd. Kalibreer uw sensoren voor de beste resultaten.
Gebruikersnotities
Voeg dit apparaat toe aan uw account om te bewerken
Youtube-video
Geen video
Voeg dit apparaat toe aan uw account om te bewerken
Vluchtafbeeldingen (0)
Geen afbeeldingen
Gekoppelde raket
Geen raket gekoppeld aan deze vlucht
Apparaatinformatie
Mercury V1
Deze vlucht is gevlogen met een Mercury V1.
Hardwareversie
Rev 1
Softwareversie
1.3
Laatst online
02-Nov at 18:12
Versnellingsmeter
32G 3-axis
Gyroscoop
2000 dgps 3-axis
Druksensor
Bosch BMP 390
Magnetometer
N/A
Vluchtmotoren
Geen motoren toegevoegd aan deze vlucht
Voeg dit apparaat toe aan uw account om te bewerken
Lanceerplaats, datum & tijd
Klik op de kaart om uw lanceerlocatie te markeren. Schakel tussen kaart- en satellietweergave.
No results found — try a different search.
Klik op de kaart · Sleep om aan te passen
Lat—
Lng—
✓ Launch location saved successfully.
✗ Could not save location — please try again.
Uitvoerregels
Uitvoerregels were not available until firmware 2.0
Motorkoppeling (BETA)
Nog in testmodus! We werken eraan om te bepalen welke motor is gebruikt.
Merk
Motor
Score
Vorm
Brand
Quest
B4~2
143
96%
91.5%
AeroTech
D15T
135
95.1%
94.2%
Quest
B6W
131
96.6%
92.8%
AeroTech
J520W
110
94%
92%
Loki
I405
100
93.5%
92.3%
AeroTech
G54
96
90.8%
85.3%
AeroTech
I245G
92
91.7%
94.1%
Loki
I377CT
88
92.9%
89.5%
Loki
G94IB
85
91.6%
89.6%
Quest
A3
83
95.3%
91.6%
Motorbrandduur
Dit is de versnellingsmeter-output van lancering tot uitbranding.
You can check this against your motors thrust data on thrustcurve.org.
Algemene vluchtinstellingen
Dit is een momentopname van de instellingen die voor deze vlucht zijn gebruikt. Ga naar de
Ga naar de pagina Mijn apparaten en configureer de instellingen..
Voorspelde druk
i
Set this to your local forecast pressure at sea level. This will offer you slightly improved accuracty for your flight, although it's not 100% essential every little helps!
Xcweather.co.uk is a decent place to grab pressures from for your location and time.
Xcweather.co.uk is a decent place to grab pressures from for your location and time.
1013 mbar
Lanceerdetectie
i
This is the altitude above the launch pad altitude where the altimeter will trigger itself into recording / flight mode.
The altimeter keeps a constant average of the pressure while waiting for launch, it uses a simple algorithm and the pre-flight buffers to do this. The most recent 120 samples (~4 seconds) are ignored so your pre-trigger altitude won't effect the ground baseline.
For almost all uses we suggest keeping this on the 25 Meter (~82 feet) default settings. If you want to test your altimeter by throwing it in the air, or are planning a very low flight you may want to lower the setting.
The altimeter keeps a constant average of the pressure while waiting for launch, it uses a simple algorithm and the pre-flight buffers to do this. The most recent 120 samples (~4 seconds) are ignored so your pre-trigger altitude won't effect the ground baseline.
For almost all uses we suggest keeping this on the 25 Meter (~82 feet) default settings. If you want to test your altimeter by throwing it in the air, or are planning a very low flight you may want to lower the setting.
25
meters
Bemonsteringsfrequentie
i
The base sample rate of the altimeter's sensors in samples per second. This setting was deprecated in firmware 2.0+.
32 Hz
Sample ratio
i
The altimeter runs at 50Hz however you can record every sample or every X samples in order to extend the log time. For example if you set the ratio to 1 it will save 1:1 samples, or if you set it to 3 it will save 1 in 3 samples.
1:
Max samples
i
This is the maximum samples the altimeter will log per flight. When it reaches this amount it will stop and save the recording.
0
Recording stop
i
This setting is how the altimeter decides to stop recording. You can choose either 300 or 600 samples stable or it will record until it's 10000 sample limit unless you press the BUTTON in Manual stop mode.
The samples stable method waits for the devices altitude not to change for the set number of samples. This is defined by not changing by more than +/- 1.0 meters for 98% of the samples, it's a reliable method to stop the recording after landing within 8-10 seconds (300 sample) or 16-20 seconds (600 sample).
The samples stable method waits for the devices altitude not to change for the set number of samples. This is defined by not changing by more than +/- 1.0 meters for 98% of the samples, it's a reliable method to stop the recording after landing within 8-10 seconds (300 sample) or 16-20 seconds (600 sample).
Auto: 300 samples stable
Oversampling
i
Oversampling is a internal setting of the BMP 390 pressure sensor. It is how many samples are taken for each reading. By taking multiple samples for each pressure reading the altimeter reduces noise and increases the resolution of the output.
The sensor can run at 50 samples per second in 4X mode, so we suggest leaving it in this mode as it will offer the highest accuracy.
The sensor can run at 50 samples per second in 4X mode, so we suggest leaving it in this mode as it will offer the highest accuracy.
4x Oversampling
IIR filter
i
The IIR filter is another internal sensor for the BMP390 pressure sensor. It is a Infinite impulse response filter used to enhance pressure measurement accuracy by reducing noise. It's primarily for smoothing out rapid pressure changes.
We suggest not setting this too high as it will cause delay to changes in altitude if set very high.
We suggest not setting this too high as it will cause delay to changes in altitude if set very high.
COEFF 3
Pressure filter
i
This filter is a software Kalman filter that runs on the altimeters processor.
The Kalman filter uses a prediction step based on a system model and then a correction step using new measurements to refine its estimate, it creates accurate most certain results from data with noise in it.
The Kalman filter uses a prediction step based on a system model and then a correction step using new measurements to refine its estimate, it creates accurate most certain results from data with noise in it.
Kalman 2 (default)
Lockout time
i
The Lockout time is how long the altimeter should stop making decisions and taking actions if it detects unusual high speed altitude changes that are unexpected.
These false readings can be caused by ejection charges (if the altimeter is in the same compartment as the motor ejection gases) or even when you transition to Mach speeds and can give false readings of altitude changes.
When these events are detected the system enters Lockout for the specified time while it stabalises. This effects things like triggering the output, or calculating other data.
These false readings can be caused by ejection charges (if the altimeter is in the same compartment as the motor ejection gases) or even when you transition to Mach speeds and can give false readings of altitude changes.
When these events are detected the system enters Lockout for the specified time while it stabalises. This effects things like triggering the output, or calculating other data.
750ms
Lockout change
i
This is how we detect a lockout. If the pressure changes by this much in a single sample downwards (pressure increase, lower altitude) then it's likely to be a false reading. Multiply the setting by 32 to get the speed in meters per second that it will trigger at.
1.5 meters
Sync sensors
i
The filters on the pressure sensor can cause it to lag very slightly behind the Accelerometer and Gyroscope data.
The Sync sensors option detects how far out of sync these sensors are. It then corrects the Acceleration and Gyroscope readings to match the pressure sensor.
INGESCHAKELD (9 samples / 281.00ms)
Orientation
i
This is the orientation you intend to install the Altimeter in your rocket. It's needed to ensure completly accurate angles and orientation charts and reports. Check out the Manual for more information on this.
Upwards (text up)
IMU filter
i
The IMU filter, or fusion filter takes the data from each axis of the Gyroscope and Accelerometer to calculate the Pitch, Roll, Yaw and tilt angle from vertical.
These filters can build up some discrepency over time so it's important to calibrate your sensors to minimise this.
Madgwick 6-Axis
Launch ALP
i
This is prevention against accidental launch detection.
With this disabled the launch is based only on pressure and something that creates a low pressure can trigger the flight by accident. For example pulling your nose cone off can even trigger it.
With this enabled the rocket also needs to have seen 8 samples (0.25 seconds) of acceleration above this setting in the last 3 seconds as well as the pressure drop to trigger. There is a backup trigger of 1.05 seconds of altitude being above the launch detect setting too.
There are very few situations where this option would cause issues, so we suggest leaving it on.
With this disabled the launch is based only on pressure and something that creates a low pressure can trigger the flight by accident. For example pulling your nose cone off can even trigger it.
With this enabled the rocket also needs to have seen 8 samples (0.25 seconds) of acceleration above this setting in the last 3 seconds as well as the pressure drop to trigger. There is a backup trigger of 1.05 seconds of altitude being above the launch detect setting too.
There are very few situations where this option would cause issues, so we suggest leaving it on.
1.4G
Launch lock
i
When enabled, the altimeter locks out recording for a set period after power on to prevent false triggering during setup.
DISABLED
Static temperature
i
A fixed temperature value used for altitude calculation when the external temperature sensor is disabled or not connected.
15 °C
Temp sensor
i
If an external MT1 temperature sensor is connected, this controls whether it is used for logging only or also for altitude calculations.
Uitvoerinstellingen
Dit is een momentopname van de instellingen die voor deze vlucht zijn gebruikt.
Uitgang 1 ingeschakeld
i
Disable or enable the output from being able to turn on or off.
UITGESCHAKELD
Uitgang 1 trigger
i
After apogee (altitude)
This method triggers when the altitude drops below the set altitude after apogee is detected.After apogee (time)
This method triggers the defined seconds after apogee is detected.After launch (altitude)
This method is activated if/once the altimeter exceeds the set altitude after launch.After launch (time)
This option triggers the defined seconds after launch is detected.After burnout (time)
This method triggers the defined seconds after burnout is detected.
After apogee (altitude)
Uitgang 1 inschakeltijd
i
This is how long the output should trigger ON state when the rules are met.
2000ms
Uitgang 1 hoogte
i
This is the altitude to trigger at if using a trigger method that works on altitude.
For example if you set this to 75m and After apogee (altitude) for the trigger then the output will turn on at 75m on descent above the launch altitude.
For example if you set this to 75m and After apogee (altitude) for the trigger then the output will turn on at 75m on descent above the launch altitude.
0 meters
Uitgang 1 tijd
i
This is the time variable for output triggers that work on time.
For example if you set this to 3 seconds and After apogee (time) as the trigger then the output will turn on 3 seconds after apogee.
For example if you set this to 3 seconds and After apogee (time) as the trigger then the output will turn on 3 seconds after apogee.
0 seconds
Hoogtevergrendeling
i
Altitude lock is a safety feature that prevents the output from triggering if the altitude is below this level when the rules are met.
50.00 m
Kantelvergrendeling
i
This is another safety feature. It can be used to disable the output if the rocket has gone too far from vertical.
For example if you set the tilt angle lock to 40 degrees then the output will not fire if the rocket is more than 40 degrees from vertical. To disable set this to 0.
For example if you set the tilt angle lock to 40 degrees then the output will not fire if the rocket is more than 40 degrees from vertical. To disable set this to 0.
0.00 °
Sensorkalibratie
Kalibratie-offsets gebruikt voor deze vlucht.
Gyroscoop
⚠ Gyroscoop is niet gekalibreerd
X
0.000°
Y
0.000°
Z
0.000°
Versnellingsmeter
⚠ Versnellingsmeter is niet gekalibreerd
X
0.000 mG
Y
0.000 mG
Z
0.000 mG
Apparaatinstellingen
Dit is een momentopname van de instellingen die voor deze vlucht zijn gebruikt.
Dit is een momentopname van de instellingen die voor deze vlucht zijn gebruikt.
Apparaat-TAG
i
A custom name or tag assigned to this device for easy identification.
Merc8853
Taal
i
The language setting configured on the device.
en
Afsluitmodus
i
Controls what happens after recording. Standard shuts down normally, Delayed keeps WiFi on for 30 seconds after landing, Stay on keeps the device powered on.
Delayed 30s
LED-helderheid
i
The brightness level of the LED indicators on the Mercury. Lower values save battery.
WiFi TX power
i
WiFi transmit power level. Higher gives better range but uses more battery.
Slaapstand
i
Controls whether the device enters low-power sleep when idle.
Stay awake
Batterijmonitor
i
Monitors battery voltage during the flight.
ENABLED
Cloud group
i
The cloud group / category this flight is assigned to.
GP6 / GP7 poorten
GP-poortbesturing was niet beschikbaar voor firmware 2.0
I2C PCA9685 Servoboard
GP-poortbesturing was niet beschikbaar voor firmware 2.0
Voorspelling en luchtremmen
Deze functie was niet beschikbaar voor versie 2.10+
Reacties
Reacties
Inloggen om te reageren.
Inloggen om te reageren.